|
Versatile gasket
Plate Heat Exchanger is used in almost all process industries, as
such the gaskets are specifically selected based on the operating
condition. A wide range of gaskets are available such as NBR, EPDM,
IIR, FPM, Silicon, etc.
* Special Hisaka (S-1) glue shall be applied for bonding |
|
|
 |
Bond free gasket Slit
In Type
These plate gaskets do not need adhesive. The slit in gasket is
especially recommended for those applications where frequent replacement
of the gasket is required. Further, without the adhesives, adhesive
odor is reduced. This slit in type gasket is suitable for Food application.
|
|
PTFE cushion gasket (TCG)
Through our own development, HISAKA has pioneered PTFE cushion gaskets
for the Plate Heat Exchanger. It is normally used in applications
where conventional synthetic rubber would have limitations due to
teh corrosiveness of the fluid being handled. With this new development,
the Plate Heat Exchangers can be applied in much wider field than
before due to the chemical resistance and the durability of PTFE.
* Special double adhesive tape shall be applied for bonding. |
|
| Features |
| 1. |
Excellent
chemical resistance against most chemical especially organic
solvent. |
| 2.
|
Due
to the elastic core of the TCG gasket, it does not require
strong tightening torque during the assembly of the unit.
Thus reducing the risks of plate deformation due to over tightening. |
| 3. |
TCG
gasket can be used for one side only, if the non-corrosive
fluid is running in the other side where conventional gasket
can be used. |
|
|
|
