SEMI WELDED PLATE

FEATURES
High heat transfer coefficient owing to uniform distribution of flow to entire heat transfer is by special plate pattern. A couple of plates are laser welded with o-ring at port holes between the plates, thus semi-welded plate heat exchanger can be used for higher pressure compare to conventional Plate Heat Exchanger.

ADVANTAGES
1.	High pressure resistance is about 2 to 3 times higher than all gasket type heat exchanger.
2.	Save maintenance cost.
3.	Chemical resistance TCG o-ring and synthetic rubber are selectively used.
4.	Nozzle pitch dimensions of semi-welded plate heat exchangerare same to those of following plate heat exchangers. WX-10 and RX-10 WX-50 and RX-50 WX-90 and UX-90 Therefore, RX-10, RX-50, UX-90 can be replaced to WX series without changing location of connection pipes.
5.	Different from full welded plate heat exchanger, Semi-welded plate heat exchanger can be easily added plates to increase capacity.
6.	Semi-welded plates heat exchanger can be disassembled and done maintenance for the future.

CONDENSING PLATE

FEATURES
YX type heat exchanger is specially designed for condenser to provide high condensing performance in characteristic formed various material plates. This characteristic YX shape is enable to be light and compact construction and it has the heat transfer performance of 2 to 3 times as high as conventional S&T heat exchanger.

ADVANTAGES
1.	Heat Transfer coefficient is about 2 times as high as that of shell & tube heat exchager. The condensing surface is always secured and the heat transfer coefficient is improved because condensate is immediately drained out.
2.	To achieve much less vapor pressure drop than the conventional Plate type Heat Exchanger, special consideration of plate characteristic is taken in contribution.
3.	Cooling water consumption is about half of S&T heat exchanger.
4.	The use of TCG gasket is selectively used and it expands the application to wide field.
5.	Easy change of condensing capacity by increase or reducing the number of plates.
6.	Because of inlet and out let connections at the same side, YX type can be applied not only an total condenser but also to partial condenser.

MULTI GAP PLATE

FEATURES
GX-21 provides 10mm channel space both hot and cold sides, so that heat recovery can be performed between hot and cold slurry. GX-22 plate is made by reversing and upside down GX-21 plates.

Mixed plate arrangement of GX-21 and GX-22 named GX-23. It gives the widest channel spacing (20mm) at one side, which is available for large size particles.

GX plates have wider depth, larger corrugation pitch and less metal contact points, comparing to conventional plates.

ADVANTAGES
1.	Easy to flow throughout between plates.
2.	GX series provides the widest channel spacing.
3.	Mixed plates arrangement gives three types of channel spacing.
4.	It is better performance for slurry, sludge and crystal containing liquid.
5.	Electrolytic polishing selectively used for food application.