| You
can use the HISAKA Web Simulator, under the following conditions:
|
| 1.
|
The
calculation program has 2 patterns: Liquid - Liquid and Steam
- Liquid.
For Liquid, the default physical properties are Water equivalent.
Please contact HISAKA if you find you are unable to make a
calculation by your requested fluid. |
| 2.
|
The
default value for pressure drop is set to 0.05MPa. This value
can be changed as your design condition. |
| 3.
|
Output
calculation results may differ from the design results calculated
by HISAKA. If this happens, please use the HISAKA design results
as the correct values. |
| 4.
|
The
price indicator shows only for your reference. Please contact
HISAKA for actual quoted prices. |
| 5. |
For
steam heating, the steam temperature is fixed at 133 degrees
centigrade (0.2MPaG). |
| 6.
|
Either
stainless steel (type 316) or titanium can be selected as
the plate material.
Please contact HISAKA if you need other materials. |
| 7. |
The
design temperature, design pressure, and test pressure are
based on HISAKA Standard.
If your design conditions exceed our standard, please contact
HISAKA. |
| 8.
|
Press
the Tab key to entry field. |
| 9.
|
Calculation
will be done a 10% or greater for performance margin. |
| 10.
|
Calculated
data is saved for one month. After this period has gone, you
will need to calculate again. |
